The smart connectivity via bluetooth technology of Testo 872 and Testo605i helps to measure and record, the ambient temperature and humidity while recording thermal images of any electrical and mechanical equipment or any object. It helps in analysing/troubleshooting and also helps to take corrective actions in any electrical equipment as per NETA (National Electrical Testing Association) standards for Delta-T temperatures (i.e. Delta-T = Hot spot temperature – Ambient temperature). The combination of Testo Thermal Imager 872 with Testo’s Thermo-Hygrometer 605i, also helps to record real time humidity images of any object or any scene in building applications. It helps building leakage contractors to detect leaks in buildings/establishments.
Using thermal imager with Testo TRMS Digital Multimeter 760-3
The combination uses of Testo thermal Imager 868 along with Testo’s TRMS Digital Multimeter 760-3, helps user to get real time system AC/DC voltages, mA current and other important electrical parameters of your load / electrical panel / electrical motors. The unique feature of LPF- Low pass filter enable you to measure precisely the voltages at the output of any non-linear loads, VFD drives etc. You can precisely analyse the problem associated with your electrical equipment with these Testo’s instruments and later you can fix them appropriately.
Using thermal imager with Testo TRMS Clamp Meter770-3
Due to SMART connectivity via blue tooth technology of testo 872 and testo770-3, helps user to measure and record automatically in report, the real time system voltage, load current and load power while you are taking thermal image of any electrical panel / electrical motors. You can precisely analyse the problem associated with your electrical equipment with this combination use of Testo’s instruments and later you can fix them appropriately.
Using thermal imager with Vane anemometer SMART probe –testo410i
The combination of Testo thermal Imager 868 or testo 872 along with Testo’s vane type anemometer SMART probe testo410i, helps user to get real time air / wind velocities data on Testo’s SMART probe app, while you are taking thermal image of any electrical switch yard or outdoor electrical installations. With this you can precisely determine the hot spot temperatures with consideration of wind velocities and wind compensation factors as per standards available. This will avoid error in hot spot temperature and will also avoid wrong corrective actions which one has to fix the problem associated with the electrical systems.
Testo is currently running promotional offers on these packages. For more info, write to firstname.lastname@example.org or visit us at www.testo.com